Caster Wheels|Industrial Casters|Foldable Trolley-HO CASTER

Choose the suitable caster for conviently use!

How to select a suitable caster

Load Capacity:

The load capacity is the maximum weight that each caster can support individually. The heavier the load, the larger the wheel required for the caster. The weight of the load also influences the mobility of the wheel. Hence, in order to select the suitable caster, please measure the required load capacity.

Load Capacity = Weight of Product or Estimated Load ÷ Required number of Casters

Overall Height:

Measured from the floor to the actual mounting point is the required overall height.

Floor Conditions

Floor Conditions affect the performance of mobility of caster and wheel. For example, rugged floor is suitable for elastic rubber wheels; the PU wheel has the better performance on the floor with oil or chemical. For more information about wheels performance on different flooring type, please navigate to our wheel type page.

Other Specification:

This caster has a top plate attachment with a swivel, brake or rigid wheel assembly. Plate mount casters are generally used for higher weight loads.

This caster has a stem attachment with a swivel wheel assembly that will allow rotation of 360 degrees, which permits movement in any direction. Stem mount casters are generally used for lower weight loads.

Study Details

Professional &
Technical Products

Bearing Type

Elasticity = Elast.

Wear Resistance = WER

Oil Resistance = OR

Water Resistance = WR

Chemical Resistance = ChR

Heat Resistance = HR

Cold Resistance = CR

Elastic Rubber

With the features of high elasticity, excelling in load bearing, wear resistances, Elastic Rubber is suitable for using in the most of environment, especially the case of need buffer. Also, travel with high stability and reduce the friction coefficient, it can be easily moved in any uneven surface throughout indoors or outdoors.

Elast. well
WER well
WR normal
ChR normal
HR 80℃
CR -40℃

Thermo-Plastic-Rubber

TPR is a kind of thermoplastic elastomers. The features are having good wear, resistance, shock absorbing, and quiet rolling to protect the floor. Resistant to cleaning chemicals, acids, alcohol, and water, TPR wheels are an excellent choice for wash-down applications, such as medical equipment, laboratory and kitchen facilities.However, TPR is not recommended used in rugged floor and any oily place.

Elast. well
WER normal
WR normal
ChR normal
HR 50℃
CR -10℃

Polypropylene

Use the high impact resistance material to product the plastic wheel. It is light weight and excellent in moisture and corrosion resistance. Also, the price is the most economical.

WER normal
OR normal
WRnormal
ChR normal
HR 80℃
CR -30℃

Nylon

Nylon is light in weight and excellent resistances against heat, moisture, wear, and corrosion. Our wheels can be differentiated in the black nylon and the white nylon with highest toughness.

WER well
OR well
WR wll
ChR Well
HR 80℃
CR -30℃

Cast Iron

Cast Iron is made of gray iron. Heavy in weight but these wheels are exceptionally long wearing, abrasion, built for high capacity applications and have the ability to withstand extreme heat.

WER well
OR well
WR normal
ChR normal
HR 100℃
CR -20℃

Phenolic

Made of phenolic resin and the specific fabric through thermosetting process, phenolic wheels are high load capacities, resistant to extreme temperatures and high compression. It is the high-end material of caster.

WER normal
OR well
WR normal
ChR normal
HR 170℃
CR -20℃

Polyurethane

Polyurethane wheel is suppressive property against fouling to floor surface and the resistance against oil and chemical. Besides, natural perfusion PU cannot be hydrolyzed, so it can maintain a stable material hardness and less pollution to the ground. The range of application is quite extensive.

Elast. normal
WER well
OR well
WR normal
ChR Normal
HR 80℃
CR -20℃

Thermoplastic Polyurethanes

TPU has good wear resistance and abrasion. For our TPU wheel, we will add plastic cover for prevent the dust and beautify the appearance. However, for thermoplastic polyurethanes, it will be hydrolyzed as time went by.

Elast. normal
WER well
OR normal
WR normal
ChR normal
HR 80℃
CR -20℃

Processes

Request from Customer

Specification Definition

Specification Confirmation

NRE Charge & Scheduling

Protitype Sampling

Reliability Testing

Pilot Run

Mas Production
(MOQ Request)

Share Catalog
Online Purchase

Scroll